GLP-1 raw material · research use · factory-direct
Survodutide raw material supplier CAS 2805997-46-8 · Dual glucagon / GLP-1 receptor agonist
Survodutide raw material from Pepti, Guangzhou: a dual glucagon and GLP-1 receptor agonist supplied as bulk powder or lyophilized vials, released with a batch COA reporting RP-HPLC purity and MS identity. No public batch record for survodutide is in the Pepti COA library yet; the certificate for a quoted lot is shared during RFQ review. Sample 1 kit (10 vials); private-label OEM from 50 kits.
What Survodutide is
Dual glucagon and GLP-1 receptor agonist (acylated glucagon-derived analogue). INN survodutide; published in WHO INN lists.
Survodutide is a synthetic glucagon-derived peptide engineered to activate both the glucagon receptor and the GLP-1 receptor, with a fatty-diacid acylation on a lysine side chain for a long half-life. Among the dual agonists on this site it sits closest to mazdutide in concept, but it is built on a glucagon backbone rather than an oxyntomodulin backbone, and its balance of activity at the two receptors is different by design. For the chemist, the practical differences are in the hydrophobic profile and the impurity pattern, not in the analytical approach.
The sequence is public through the WHO INN records. PubChem CID 171378821 lists the molecular formula C192H289N47O61 and a computed molecular weight of about 4232 g/mol; the CAS number is 2805997-46-8 and NCATS GSRS lists the substance under UNII 2ALA66NS64. One identifier caution for buyers: some supplier documents in circulation attach this CAS number to mazdutide by mistake. Cross-check any certificate's CAS against PubChem before accepting it as an identity confirmation.
Survodutide is the newest compound in the Pepti GLP-1 family and the only one without a public batch record on the review date. That is stated plainly here rather than hidden behind a generic purity claim. A buyer who orders survodutide receives the lot certificate during RFQ review, before payment, and can run the same cross-checks described in the verification guide: compare CAS and theoretical mass, confirm the lot alias on the carton, and test a received sample independently if required.
Supply formats, units and minimums
Two formats, one unit system, no hidden tiers.
Raw powder
Survodutide raw material is supplied as bulk powder from 5 g, shipped cold-chain. Each shipment is tied to one production batch and its COA; the lot code on the container matches the lot code on the certificate. Raw powder is the format research organizations and fill-finish partners ask for when they run their own weighing, reconstitution or formulation work.
Lyophilized vials
The same batch can be filled as lyophilized powder in glass vials. The unit is fixed: 1 kit = 10 vials. Published lot strengths for Survodutide are on request; other fill weights are quoted on request. Vials ship with a neutral label by default; private-label artwork is handled under the OEM minimum.
Minimums
- Sample order: 1 kit (10 vials) of one compound and strength, so a buyer can test before scaling.
- Private-label OEM: 50 kits (500 vials) per artwork, after label scope is approved.
- Bulk powder: from 5 g, shipped cold-chain.
- Custom sequences: 100 kits (1,000 vials), typically about 15 days after specification and payment confirmation — for analogues not listed on this site.
Because no public record exists yet, survodutide is quoted lot by lot: the RFQ reply includes the certificate for the lot that would ship, with its HPLC purity, MS identity and the three dates. Vial strengths are quoted on request from the released lot, and bulk raw powder is supplied from 5 g, cold-chain, under the same certificate. If you need a public record before ordering, say so; records are published as they are prepared and the library search on peptioem.com shows the current state.
Specification and batch evidence
Published batch range: none yet (no public record for this compound).
Every Survodutide batch is released against a certificate of analysis that reports chromatographic purity (RP-HPLC, area-percent of the main peak) and molecular-weight identity (mass spectrometry, observed mass compared with the theoretical mass of C192H289N47O61). The COA also carries the lot code, manufacture date, test date and retest date. Those are the fields a buyer should match against the quoted lot before paying; nothing on this page replaces that lot-specific document.
What the certificate does not show matters just as much. HPLC area-percent describes how much of the UV-absorbing material elutes as the main peak; it does not quantify water, counter-ion, residual solvent or fill weight. MS identity confirms that the main component has the expected mass; it does not by itself prove the absence of a co-eluting isomer. Buyers who need those answers run their own panel on a received sample, and Pepti supports that route — see quality and batch records.
Public batch records for Survodutide
No public batch record for Survodutide is listed in the Pepti COA library yet. The batch COA for a quoted lot is shared during RFQ review, and you can search the library directly: peptioem.com/coa.
Lead-time ladder for the GLP-1 family
Three windows, counted from specification and payment confirmation.
- Sample kits5–10 days
typically, for 1-kit sample orders of a listed GLP-1 compound
- Production batch14–21 days
typically, for a first production batch after specification is confirmed
- OEM repeat order21–28 days
typically, for private-label repeat batches with artwork already approved
Lead times are typical ranges, not commitments; the applicable window is confirmed on each RFQ.
Survodutide sits in the GLP-1 family ladder with the other five compounds on this site. A sample kit normally leaves the Guangzhou site within the first window because it is filled from a released batch. A first production batch takes the middle window because synthesis, cleavage, purification, lyophilization and QC run in sequence for your specification. OEM repeat orders take the longest window because label printing, carton proofing and fill are added after the material is released. If a batch is already in stock, the quote says so and the window shortens; if a custom strength or analogue is requested, the quote says that too.
How to verify Survodutide from Pepti before you pay
Four checks that take less time than a wire transfer.
- Open the public record. Pick a lot from the list above and open it on peptioem.com. Compare the compound, strength, lot alias, purity result and dates with the quote you received.
- Ask for the lot that will ship. Public records are examples of the document format. For your order, request the COA of the exact lot allocated to you and confirm the lot code again on the shipping label when it arrives.
- Check the identifiers. CAS 2805997-46-8 and the theoretical mass of C192H289N47O61 are public; the MS result on the COA should sit within normal instrument tolerance of that mass.
- Test a received sample if your QA requires it. Order 1 kit (10 vials), send one vial to a laboratory of your choice, and compare. Pepti's own independent data point is Janoshik report #210105 (Retatrutide 20 mg sample: 19.52 mg content, 99.837% purity, analyzed 2026-10-07), which is sample-specific and verifiable at verify.janoshik.com.
Storage, shipping and handling
Cold chain in transit; retest date on the COA.
Survodutide ships from Guangzhou as sealed lyophilized powder in an insulated carton with cold packs or dry ice by route. On arrival, match the lot alias across courier label, inner carton and certificate, inspect the cold packs and seals, and log the lot. Dispatch photographs by month and destination are on the order-photos page.
Store sealed containers cold, dry and dark under the conditions stated on the certificate; equilibrate to room temperature before opening; aliquot bulk powder once into working containers. The lipidated powder may appear slightly waxy, which is normal for this class.
Use the retest date on the certificate as the trigger for re-examination by HPLC and MS, compare against the certificate values, and contact Pepti with the lot alias and raw data if a result disagrees materially.
Research-use boundary
Other GLP-1-family compounds from the same site
Semaglutide
GLP-1 receptor agonist · CAS 910463-68-2
Tirzepatide
Dual GIP / GLP-1 receptor agonist · CAS 2023788-19-2
Retatrutide
Triple GIP / GLP-1 / glucagon receptor agonist · CAS 2381089-83-2
Cagrilintide
Long-acting amylin analogue · CAS 1415456-99-3
Mazdutide
Dual GLP-1 / glucagon receptor agonist · CAS 2259884-03-0
Questions buyers ask
Why is there no public batch record for survodutide?
Because the compound is new to the Pepti library and no record has been prepared for publication yet. The lot certificate is shared during RFQ review before payment, so a buyer can still check purity, identity and dates for the exact lot. The library search on peptioem.com shows the current state.
How do I confirm a survodutide certificate is for the right molecule?
Check that the CAS number reads 2805997-46-8 and that the observed mass agrees with the theoretical mass for C192H289N47O61 (about 4232 g/mol, PubChem CID 171378821). Be aware that some documents in circulation mislabel this CAS as mazdutide; the PubChem record is the reference.
What are the minimums and lead times for survodutide?
Sample order 1 kit (10 vials); bulk raw powder from 5 g, shipped cold-chain; private-label OEM from 50 kits (500 vials). Typical GLP-1-family lead times are 5–10 days for sample kits, 14–21 days for a production batch and 21–28 days for OEM repeat orders; because survodutide is quoted lot by lot, the quote states which window applies.
What is survodutide from Pepti intended for?
Research use by research organizations, laboratories and B2B buyers. For research use only. Not for human or veterinary use. Pepti does not present itself as a cGMP drug-substance (API) manufacturer or CDMO and does not publish a GMP certificate or DMF.
Request a quote for Survodutide raw material
Send the compound, format (raw powder or lyophilized vials), quantity and destination. Mike at Pepti Supply replies on WhatsApp with the applicable batch record, lead-time window and unit pricing; email works too: contact@peptioem.com.